How To Install and Configure the CR1100
How to Install and Configure the CR1100
Download and Install the CR1100 Driver
Do not Plug in the CR1100.
Please download the CR1100 Virtual Com driver from: http://downloads.stopware.com/updates/codereader/cr1100.zip
Plug in the CR1100
Scan the ‘Rest to Factory Defaults’
Next
Scan “Enable Motion Detection"
Scan “Enable CDC VCOM Mode"
Update the COM Port
Navigate to Windows Start> Control Panel> Device Manager
Expand Ports (COMS & LPT) from the list> Right click the 'USB serial Device' and select properties
Select Port Settings> Click Advanced> select the COM Port and update it to 50
Reboot the PC
Add the Cr1100
Log in to PassagePoin as admin
Navigate to home> station preferences> hit add at the bottom > select barcode scanner> generic barcode scanner> enter a name> give it a name> select the com port> select baud rate 115200 > click finish
Related Articles
How to Install and Configure the CR1500
Download and Install the CR1500 Driver Please do not plug in the CR1500. Please download the CR1500 Virtual Com driver and Cortex tools from: https://downloads.stopware.com/updates/codereader/cr1500.zip Install the driver Plug in the CR1500 Scan the ...What are the steps to connect the Honeywell barcode readers (Hyperion 1300g) with Global?
This document shows how to conect the Honeywell barcode readers. How to Install and Configure the Honewell Barcode ScannerHow do I install and configure the CODE CR1021 Barcode Scanner?
Installing the barcode scanner for PassagePoint Global: 1. Connect the barcode scanner to your computer. 2. Download the USB Virtual COM Driver (32-bit and 64-bit Operating Systems) | Version: 2.4.2 and CortexTools2 | Version: 1.4.3.18 file at: ...ID Scanner Troubleshooting Guide
ID Scanner Troubleshooting Guide If your Drivers’ License / Passport Scanners are disconnecting or going inactive, please follow the steps below to help remedy the issue. NOTE: If you have a QS1000 / Qs2000 For issues please see KB article on ...How to Test parser for 2D Barcode Scanner in the IdTestUtility
1) Download the IdTestUtilty from http://downloads.stopware.com/updates/AcuantSDK/IdTestUtility.zip 2) Extract the IdTestUtility into it's own folder 3) Open IdTestUtlity - choose option 29 4) On the left side paste the string below @\nANSI ...